1. What is PPL-24®?
2. What makes PPL-24® better than other liners?
3. What products can be contained with PPL-24®?
4. What are the price ranges for competitor's materials (PVC, EPDM, HDPE, PP, Urethanes, ect.)?
5. When is PPL-24® not an appropriate liner choice?
6. Why did Bend Tarp and Liner/ Matai develop a PPL-30?
7. How big can factory-panels of PPL-24® be made? What are the size restrictions?
8. What is typical lead time required for PPL-24® liners?
9. What is standard packaging for PPL-24® liners?
10. How are the liners rolled out on the jobsite?
11. What is the average square footage of PPL-24® that can be installed per day?
12. When is the use of a geotextile under/overlayment appropriate?
13. How are pond liner sizes determined?
14. What is the preferred method for anchoring the edges of the liner?
15. When is a pond too steep/shallow?
16. What tools are required for field welding?
17. When is the use of tape appropriate?
18. Should field seams be wedge-welded or hand-welded (hot-air gun)?
19. Can the pond have water in it when installing the liner? How much?
20. Under what conditions should a liner not be installed?
21. Can heavy equipment/vehicles be driven on the liner?
22. What alternatives are there to welding on pipe boots, repairing holes, ect.?
23. Can PPL-24® be joined to other types of liners? To structures?
24. What kind of manpower is required for installation?
25. How are the pond liners tested for watertightness?
26. What are the most common failures/problems associated with pond liners?
27. Are the PPL® Liners fish and plant safe?
