| PROPERTY | TEST METHOD | VALUES |
| Gauge, Nominal (Mils) | ASTM-D751 | 45 +/- 10% |
| Piles Reinforcing | 6.5 Ounce | 1 |
Tounge Tear
(LBS Min.) | ASTM-D751
Procedure B | 135 x 135 lbs. |
Trapezoid Tear
(LBS Min.) | ASTM-D1117
Section 14 | 75 x 75 lbs. |
Grab Tensile
(LBS Min.) | ASTM-D751
Procedure A | 500 x 450 lbs. |
Strip Tensile
(LBS Min.) | ASTM-D751
Procedure B | 400 x 300 lbs. |
Ply Adhesion
(LBS / In. Min.) | ASTM-D751 | 10 lb. |
Hydrostatic Resistance
(P.S.I. Min.) | ASTM-D751
Procedure A | 600 psi |
Puncture Resistance
(1" Ball) | ASTM-D751 | 600 lbs. |
Low Temperature
Degrees F | ASTM-D2136 | -30°F |
Dimensional Stability
(% Max.) | ASTM-D1204
(1 Hr. @ 212°F) | 2% |
