STYLE 8130 XR®-3PW FOR POTABLE WATER APPLICATIONS
NSF 61 Approved |
| 8130 XR ®-3PW fabric | Standard | Metric |
| Coating - Type | Elvaloy®-based XR®-3compound |
| Base - Type | Polyester |
| Base - Weight (nominal) | 6.5 oz/yd2 | 220 g/m2 |
Finished Coated Weight
ASTM D-751 | 30.0 oz/yd2
± 2 oz/yd2 | 1017 g/m2
± 70 g/m2 |
Trapezoid Tear
ASTM D-4533 | 35/35 lbf min. | 156/156 N min. |
Grab Tensile
ASTM D-751 | 550/550 lbf min. | 2450/2450 N min. |
Adhesion
ASTM D-751 Dielectric Seam | 10 lbf/in min. | 9.0 daN/5 cm min. |
Hydrostatic Resistance
ASTM D-751, Procedure A | 800 psi min. | 5.51 MPa min. |
Bursting Strength
ASTM D-751 Ball Tip | 650 lbf | 2892 N |
Dead Load
MIL-T-52983E (modified)
Para. 4.5.2.19 | 2 in seam, 4 hrs, 1 in strip
210 lbf @ room temp.
105 lbf @ 160° F | 5 cm seam
935 N @ room temp
467 N @ 71° C |
Low Temperature
ASTM D-2136
1/8 in mandrel, 4hrs | pass @ -30° F | pass @ -34° F |
| |
| We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information. In case of conflict between standard and metric specifications, standard shall apply. |
